描述

TBK-988C 360 rotating LCD glass touch screen separator properties:
1. must-have for cell phone repair workshops
2. Can be turned, strong suction with doubles.
3. Precise temperature, no damage to the screen.
4. Maximum temperature of 350 degrees
5. curved screen can be mucus, straight screen separator, use temperature 80 degrees, pull the wire to separate the screen.
6. Rand screen as part of cleaning OCA, separate glass.
7. Ein-button start
8. 360 degrees free adjustment
9. The work platform can reach up to 7 inches.
Business steps:
1. Turn on the power supply: Insert the network cable into the Strom end on the back of the separator and switch on the network switch.
2. In front of the set temperature: Press the set button to prepare the temperature, press the button up to adjust the temperature to about 85 degrees and press the network to save.
3. Prepare the wire handle: equipped with wire handle to separate the screen.
4. Place the silicone-anti-slip pad: place it on the plate of the separator, direct the rubber pad with the flat hole or do not use the silicone pad.
5. Preparation for the Separation screen: Place the screen in the middle of the panel, press the start button to start the vacuum adsorption, and make sure that the screen is sucked.
6. Start cutting screen: The screen can be preheated for 3-5 minutes to start cutting.
7. After separating the burst screen, switch off the current supply of the separator. If it is dry glue, you can tear it down by hand. If it is water, it has to be removed with a blade and a glue distance from liquid.