描述

Function:

1. Closed circuit sensor, microcomputer zero crossing soft contact temperature Control, LED visual display, high power, rapid temperature rise, accuracy and Stable temperature, little influence of air flow, lead-free soldering.
2. Adjustable air flow, large and soft air flow, convenient temperature adjustment,It is suitable for many purposes.
3. Handle with sensor switch, the system will enter the working mode Hold the handle at the same time; The system will stand by when the hand is in place The operation is very convenient.
4. The automatic cooling function of the system will extend the heating life And protect the hot air gun.
5. Brushless fan with long service life and low noise.

Use:

1. Suitable for welding and desoldering many parts,
For example, SOIC, CHIP, OFP, PLCC, BGA, etc.
2. Suitable for heat shrinking, drying, paint separation, preheating, deicing and solder paste.

Operating Instructions：

1. Carefully place the workstation and place the handle on the bracket.
2. Connect the power.
3. Install the required nozzle.
4. Turn on the power supply, and the display window displays “-“, that is, the standby state (microcomputer digital LED indication)
5. Press “OR” to set the temperature. (Microcomputer digital LED indication)
6. Rotate the temperature control button to set the operating temperature you need. (Luminous discharge
Tube display indication)
7. Pick up the handle and heat the station normally. Adjust the air bottle to obtain proper air, so that it can work normally after the temperature is stabilized.
8. When the handle must be placed on the support to work after completion, the station will automatically cut off the heating power supply, and then enter the cooling mode. When the temperature is lower than 100 ℃
9. The power supply must be cut off when it is not working for a long time.

Be careful:

1. Try to use low temperature and large air. If you can work well, it can extend the heating elements and IC chips, which will be safer.
2. When heating, the handle must be placed on the support, and it cannot be placed elsewhere.
3. Please keep the air outlet clean.
4. After the work is completed, place the handle on the bracket. Before turning off the power, let the workstation cool to below 100 ℃
5. The distance between the air outlet and the object shall be at least 2mm.
6. Select different nozzles according to the needs, and the temperature has a little different nozzle for different people.